|
|
 |
|
IE Instructions
Delete and Re-Install Internet Explorer 5.0
for the Mac.
-
Download and install Internet Explorer 5.0 for the Mac from http://www.microsoft.com/mac
Note:You must have the Internet Explorer installer downloaded prior to deleting the
browser for reinstallation.
-
Restart your computer after installation is complete.
-
Set memory preferences for Internet Explorer. To do this, go to the main Internet
Explorer program file and click on it once to highlight it,
but not to open the application. (Selecting an alias will not
allow you to change memory settings).
-
Go to:
Set the preferred size to 25.5 meg (25,500 K) and the minimum to 25 meg (25,000K).
In order to make this change, make sure the locked box the lower left hand corner is not checked.
-
After you have adjusted the settings, check the locked box in the lower left hand
corner, then exit the window. Note: the minimum setting might change even after locking the settings-this is known to happen
and does not have an effect on Real Player’s performance in the browser.
Un-Install and Re-Install Real Player 8.
(You really should do this, as Mac DOES NOT upgrade
Real every time it is installed and you could have multiple installations of
Real.
-
To do this - do a search on the entire hard drive for the file g2cln. Run this
program to do a full un-install of the Real Player.
-
Download and install new Real Player 8 from http://www.real.com
and select the RealPlayer Basic link. If you need further instructions for downloading Real Player, please
go to the INTIME help pages at: http://www.intime.uni.edu/support/RealPlayer/real.htm
-
Restart your computer after installation is complete.
-
Open Real Player 8.
-
Go to:
-
Make sure that the Normal and Maximum settings are set to 10 Mbps.
-
Make sure that BUFFER AT LEAST is checked and make sure 30 seconds is in the text box.
-
Click OK.
-
Close Real.
-
Restart your computer
Set memory preferences for Real
Player 8 to 35 megs
-
Go to the main Real Player program file and click on it once, to
highlight it. (Selecting an alias will not allow you to change memory settings).
-
Go to:
Set the preferred size to 35.5 meg (35,500 K) and the minimum to 35
meg (35,000 K). In order to make this change, make sure the locked box the lower left
hand corner is not checked.
-
After you have adjusted the settings, check the locked box in the
lower left hand corner, then exit the window.
Note: The minimum setting might change even after locking the settings-this
is known to happen and does not have an effect on Real Player’s performance.
Set virtual memory – IT MUST BE ON
-
Make sure virtual memory is on by closing all programs. Then go to:
-
In the Virtual Memory, make sure that it is on and the virtual memory setting
is double that of the available built-in memory (physical memory). This means that if your physical
memory is 128 Meg, your virtual will be 256 meg. Also make sure
the RAM Disk is set to off.
-
Restart your computer.
If you have further questions, or would like clarification of these instructions,
please contact us via email at intimetech@uni.edu or submit your
questions live on our web site at http://www.intime.uni.edu/support/Questions/ask.htm
back
to top
NETSCAPE
Instructions
Note
- The default install of Netscape
automatically installs an old version of REAL. If you install a new version of
REAL, it does not replace/uninstall the old version installed within Netscape.
Delete and rebuild the Netscape preferences file on the MAC.
-
Make sure NETSCAPE is closed.
-
Go to:
-
Open Netscape—this will re-create the preferences file.
-
Quit Nestcape
-
Next, set the memory preferences for Netscape. To do this, go to the
main Netscape program file and click on it once to highlight it, but do not open the
application. (Selecting an alias will not allow you to change memory settings).
-
Quit Netscape.
-
Go to:
Set the preferred size to 25.5 meg (25,500 K) and the minimum to 25
meg (25,000 K). In order to make this change, make sure the locked box the lower left
hand corner is not checked.
-
After you have adjusted the settings, check the locked box in the
lower left hand corner, then exit the window.
Note: the minimum setting might change even after locking
the settings- this is known to happen and does not have an effect on Real
Player’s performance in the browser.
Un-Install Real Player 8 and
Re-Install Real Player 8.
(You really should do this, as Mac DOES NOT upgrade
Real every time it is installed and you could have multiple installations of
Real.)
To do this -
-
Do a search on the entire hard drive for the file g2cln. Run this
program to do a full un-install of the Real Player.
-
Download and install new Real Player 8 from http://www.real.com
and select the RealPlayer Basic link. If you need further instructions for downloading Real Player, please
go to the INTIME help pages at: http://www.intime.uni.edu/support/RealPlayer/real.htm
-
Restart your computer after installation is complete.
-
Open Real Player 8.
-
Go to:
-
Make sure that the Normal and Maximum settings are set to 10 Mbps.
-
Make sure that BUFFER AT LEAST is checked and make sure 30 seconds is in the text box.
-
Click OK.
-
Close Real.
-
Restart your computer.
Set memory preferences for Real
Player 8 to 35 megs
-
Go to the main Real Player program file and click on it once, to highlight it. (Selecting an alias will not allow you to change
memory settings).
Go to:
Set
the preferred size to 35.5 meg (35,500 K) and the minimum to 35
meg (35,000 K). In order to make this
change, make
sure the locked box the lower left hand corner is not checked.
-
After you have adjusted the settings, check the locked box in
the
lower left hand corner, then exit the window.
Note: the minimum setting might change even after locking the settings-this
is known to happen and does not have an effect on Real Player’s performance.
Set virtual memory – IT MUST BE
ON
Make sure virtual memory is on by closing all programs.
Then go to:
-
In the Virtual Memory, make sure that it is on and the virtual memory setting is double that of the available built-in
memory (physical memory). This means that if your physical memory is 128 Meg, your virtual will be 256 meg.
Also make sure the RAM Disk is set to off.
-
Restart your computer.
If you have further questions, or would like
clarification of these instructions, please contact us via email at intimetech@uni.edu
or submit your questions live on our web site at http://www.intime.uni.edu/support/Questions/ask.htm
back
to top
|